## CentreCOM AR560S 設定例集 2.9
##  175 センター/リモート間でIPv6マルチキャストネットワークの構築
##  ルーターAのコンフィグ

CREATE PPP=0 OVER=eth0-ANY
SET PPP=0 OVER=eth0-ANY USER=userA@isp PASSWORD=isppasswdA BAP=OFF LQR=OFF ECHO=ON
ENABLE IP
ADD IP INT=vlan1 IP=192.168.1.1
ADD IP INT=ppp0 IP=172.16.0.1 MASK=255.255.255.255
ADD IP ROUTE=0.0.0.0 MASK=0.0.0.0 INT=ppp0 NEXTHOP=0.0.0.0
ENABLE FIREWALL
CREATE FIREWALL POLICY=net
ENABLE FIREWALL POLICY=net ICMP_F=PING,UNREACH
DISABLE FIREWALL POLICY=net IDENTPROXY
ADD FIREWALL POLICY=net INT=vlan1 TYPE=PRIVATE
ADD FIREWALL POLICY=net INT=ppp0 TYPE=PUBLIC
ADD FIREWALL POLICY=net NAT=ENHANCED INT=vlan1 GBLINT=ppp0
ADD FIREWALL POLICY=net RULE=1 ACTION=ALLOW INT=ppp0 PROTO=41 IP=172.16.0.1 GBLIP=172.16.0.1
ENABLE IPV6
ADD IPV6 INT=vlan1 IP=2001:0:0:1::1/64 PUBLISH=YES
ENABLE IPV6 ADVERTISE
ADD IPV6 TUNNEL local=172.16.0.1 target=172.16.0.2 INT=virt0
ADD IPV6 TUNNEL local=172.16.0.1 target=172.16.0.3 INT=virt1
ADD IPV6 RIP INT=virt0
ADD IPV6 RIP INT=virt1
ENABLE IPV6 RIP
ENABLE IPV6 MLD
ENABLE IPV6 MLD INT=vlan1
ENABLE IPV6 MLD INT=virt0
ENABLE IPV6 MLD INT=virt1
ENABLE PIM6
ADD PIM6 INT=vlan1
ADD PIM6 INT=virt0
ADD PIM6 INT=virt1
ADD PIM6 BSRC
ADD PIM6 RPC GROUP=ff0e:0:0:1::/64