## CentreCOM AR560S 設定例集 2.9
##  73 OSPF基本設定例
##  ルーターAのコンフィグ

CREATE PPP=0 OVER=eth0-ANY
SET PPP=0 OVER=eth0-ANY BAP=OFF IPREQUEST=OFF USER=user@ispA PASSWORD=isppasswdA LQR=OFF ECHO=ON
ENABLE IP
ADD IP INT=ppp0 IP=4.4.4.1 MASK=255.255.255.255
ADD IP INT=vlan1 IP=192.168.10.1 MASK=255.255.255.0
ADD IP ROUTE=0.0.0.0 INT=ppp0 NEXTHOP=0.0.0.0
ENABLE L2TP
ENABLE L2TP SERVER=BOTH
SET L2TP PASSWORD=l2tpA
ADD L2TP CALL=remote IP=12.34.56.78 TYPE=VIRTUAL REMOTE=remote PRECEDENCE=IN PASSWORD=l2tpB
CREATE PPP=1 OVER=TNL-remote IDLE=ON BAP=OFF LQR=OFF
ADD IP INT=ppp1 IP=1.1.1.1 MASK=255.255.255.252
ENABLE FIREWALL
CREATE FIREWALL POLICY=net
ENABLE FIREWALL POLICY=net ICMP_F=PING,UNREACH
DISABLE FIREWALL POLICY=net IDENTPROXY
ADD FIREWALL POLICY=net INT=ppp0 TYPE=PUBLIC
ADD FIREWALL POLICY=net INT=vlan1 TYPE=PRIVATE
ADD FIREWALL POLICY=net INT=ppp1 TYPE=PRIVATE
ADD FIREWALL POLICY=net NAT=ENHANCED INT=vlan1 GBLINT=ppp0 GBLIP=4.4.4.1
ADD FIREWALL POLICY=net RULE=1 AC=ALLOW INT=ppp0 PROTO=UDP GBLPO=1701 GBLIP=4.4.4.1 PO=1701 IP=4.4.4.1
ADD OSPF AREA=0.0.0.0
ADD OSPF RANGE=1.1.1.0 MASK=255.255.255.252 AREA=0.0.0.0
ADD OSPF RANGE=192.168.10.0 MASK=255.255.255.0 AREA=0.0.0.0
ADD OSPF INT=vlan1 AREA=0.0.0.0
ADD OSPF INT=ppp1 AREA=0.0.0.0 DEMAND=ON
SET OSPF INT=vlan1 PASSIVE=ON
ENABLE OSPF