## CentreCOM AR300/AR700 シリーズ 設定例集 2.3
##  113 PPPoEインターネット接続環境におけるL2TP LAN間接続（IP/AppleTalk。片側アドレス不定）
##  ルーターBのコンフィグ

CREATE PPP=0 OVER=eth1-any
SET PPP=0 OVER=eth1-any IPREQUEST=ON USER=user@ispB PASSWORD=isppasswdB LQR=OFF BAP=OFF ECHO=ON
ENABLE IP
ENABLE IP REMOTEASSIGN
ADD IP INT=eth0 IP=192.168.20.1 MASK=255.255.255.0
ADD IP INT=ppp0 IP=0.0.0.0
ADD IP ROUTE=0.0.0.0 INT=ppp0 NEXTHOP=0.0.0.0
ENABLE TRIGGER
CREATE TRIGGER=1 PERIODIC=3 SCRIPT=reset.scp
CREATE TRIGGER=2 INTERFACE=ppp0 EVENT=UP CP=IPCP SCRIPT=up.scp
CREATE TRIGGER=3 INTERFACE=ppp0 EVENT=DOWN CP=IPCP SCRIPT=down.scp
ENABLE L2TP
ENABLE L2TP SERVER=BOTH
ADD L2TP CALL=remote IP=4.4.4.1 TYPE=VIRTUAL REMOTE=remote PRECEDENCE=OUT PASSWORD=l2tpA
CREATE PPP=1 OVER=TNL-remote IDLE=ON BAP=OFF LQR=OFF
ADD IP INT=ppp1 IP=0.0.0.0
ADD IP ROUTE=192.168.10.0 MASK=255.255.255.0 INT=ppp1 NEXT=0.0.0.0
ENABLE APPLETALK
ADD APPLETALK PORT INT=eth0 SEED=20
ADD APPLETALK ZONE=NetB PORT=1 DEFAULT
ADD APPLETALK PORT INT=ppp1 DEMAND=ON
ADD APPLETALK ROUTE=10 PORT=2 HOPS=2
ENABLE FIREWALL
CREATE FIREWALL POLICY=net
ENABLE FIREWALL POLICY=net ICMP_F=PING,UNREACH
DISABLE FIREWALL POLICY=net IDENTPROXY
ADD FIREWALL POLICY=net INT=eth0 TYPE=PRIVATE
ADD FIREWALL POLICY=net INT=ppp0 TYPE=PUBLIC
ADD FIREWALL POLICY=net INT=ppp1 TYPE=PRIVATE
ADD FIREWALL POLICY=net NAT=ENHANCED INT=eth0 GBLINT=ppp0