## CentreCOM AR300/AR700 シリーズ 設定例集 2.3
##  51 PPPoEによるLAN型インターネット接続（スタティックNAT）
##  ルーターのコンフィグ

CREATE PPP=0 OVER=eth1-any
SET PPP=0 OVER=eth1-any BAP=OFF IPREQUEST=ON USER=user@isp PASSWORD=isppasswd LQR=OFF ECHO=ON
ENABLE IP
ENABLE IP REMOTEASSIGN
ADD IP INT=eth0 IP=192.168.10.1 MASK=255.255.255.0
ADD IP INT=ppp0 IP=0.0.0.0
ADD IP ROUTE=0.0.0.0 INT=ppp0 NEXTHOP=0.0.0.0
ENABLE FIREWALL
CREATE FIREWALL POLICY=net
ENABLE FIREWALL POLICY=net ICMP_F=PING,UNREACH
DISABLE FIREWALL POLICY=net IDENTPROXY
ADD FIREWALL POLICY=net INT=eth0 TYPE=PRIVATE
ADD FIREWALL POLICY=net INT=ppp0 TYPE=PUBLIC
ADD FIREWALL POLICY=net NAT=STANDARD INT=eth0 IP=192.168.10.2 GBLINT=ppp0 GBLIP=4.4.4.2
ADD FIREWALL POLICY=net NAT=STANDARD INT=eth0 IP=192.168.10.3 GBLINT=ppp0 GBLIP=4.4.4.3
ADD FIREWALL POLICY=net NAT=STANDARD INT=eth0 IP=192.168.10.4 GBLINT=ppp0 GBLIP=4.4.4.4
ADD FIREWALL POLICY=net NAT=ENHANCED INT=eth0 GBLINT=ppp0 GBLIP=4.4.4.1
ADD FIREWALL POLICY=net RULE=1 AC=ALLOW INT=ppp0 PROTO=TCP GBLIP=4.4.4.2 GBLPORT=80 IP=192.168.10.2 PORT=80
ADD FIREWALL POLICY=net RULE=2 AC=ALLOW INT=ppp0 PROTO=TCP GBLIP=4.4.4.3 GBLPORT=25 IP=192.168.10.3 PORT=25
ADD FIREWALL POLICY=net RULE=3 AC=ALLOW INT=ppp0 PROTO=TCP GBLIP=4.4.4.4 GBLPORT=53 IP=192.168.10.4 PORT=53
ADD FIREWALL POLICY=net RULE=4 AC=ALLOW INT=ppp0 PROTO=UDP GBLIP=4.4.4.4 GBLPORT=53 IP=192.168.10.4 PORT=53
ENABLE TRIGGER
CREATE TRIGGER=1 PERIODIC=3 SCRIPT=reset.scp
CREATE TRIGGER=2 INTERFACE=ppp0 EVENT=UP CP=IPCP SCRIPT=up.scp
CREATE TRIGGER=3 INTERFACE=ppp0 EVENT=DOWN CP=IPCP SCRIPT=down.scp