[index] CentreCOM x610シリーズ コマンドリファレンス 5.4.7
モード: RIPモード
カテゴリー: IP / 経路制御(RIP)
(config-router)# [no] default-information originate
RIP経路表にデフォルト経路(Network: 0.0.0.0/0, Next Hop: 0.0.0.0)を追加する。
no形式で実行した場合は、RIP経路表からデフォルト経路を削除する。
awplus(config)# do show ip rip ↓ Codes: R - RIP, Rc - RIP connected, Rs - RIP static, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP Network Next Hop Metric From If Time Rc 192.168.10.0/24 1 vlan10 Rc 192.168.20.0/24 1 vlan20 Rc 192.168.30.0/24 1 vlan30 awplus(config)# router rip ↓ awplus(config-router)# default-information originate ↓ awplus(config-router)# do show ip rip ↓ Codes: R - RIP, Rc - RIP connected, Rs - RIP static, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP Network Next Hop Metric From If Time Rs 0.0.0.0/0 1 -- Rc 192.168.10.0/24 1 vlan10 Rc 192.168.20.0/24 1 vlan20 Rc 192.168.30.0/24 1 vlan30
■ すでにredistributeコマンドでスタティックなデフォルト経路を再通知するよう設定している場合(「redistribute static」)は、本コマンドを実行してもRIP経路表は変更されない。
router rip (グローバルコンフィグモード)
|
+- default-information originate(RIPモード)
redistribute(RIPモード)
show ip rip(非特権EXECモード)
(C) 2011 - 2017 アライドテレシスホールディングス株式会社
PN: 613-001613 Rev.R