show ip pim sparse-mode interface

モード: 非特権EXECモード
カテゴリー: IPマルチキャスト / PIM


> show ip pim sparse-mode interface [detail]


(PIM-SM)PIM-SMインターフェースの情報を表示する。


パラメーター

detail 詳細な情報を表示する


使用例

awplus> show ip pim sparse-mode interface
Total configured interfaces: 3   Maximum allowed: 31
Total active interfaces:     3

Address          Interface VIFindex Ver/   Nbr    DR    DR
                                    Mode   Count  Prior
172.16.10.1      vlan10    0        v2/S   0      1     172.16.10.1
172.17.10.1      vlan20    2        v2/S   1      1     172.17.10.2
172.18.10.1      vlan30    3        v2/S   1      1     172.18.10.2

表 1:オプション未指定時
Total configured interfaces 設定済みPIM-SMインターフェースの数
Maximum allowed 設定可能なPIM-SMインターフェースの数
Total active interfaces 動作中のPIM-SMインターフェースの数
Address インターフェースのIPアドレス
Interface インターフェース名
VIFindex マルチキャスト仮想インターフェース番号
Ver/Mode PIMバージョン(v2 = version 2)/モード(S = Sparse)
Nbr Count インターフェース上の隣接ルーター数
DR Prior DR(代表ルーター)優先度
DR DRのIPアドレス

awplus> show ip pim sparse-mode interface detail
vlan10 (vif 0):
  Address 172.16.10.1, DR 172.16.10.1
  Hello period 30 seconds, Next Hello in 14 seconds
  Triggered Hello period 5 seconds
  Neighbors:

vlan20 (vif 2):
  Address 172.17.10.1, DR 172.17.10.2
  Hello period 30 seconds, Next Hello in 19 seconds
  Triggered Hello period 5 seconds
  Neighbors:
   172.17.10.2

vlan30 (vif 3):
  Address 172.18.10.1, DR 172.18.10.2
  Hello period 30 seconds, Next Hello in 17 seconds
  Triggered Hello period 5 seconds
  Neighbors:
   172.18.10.2

表 2:detailオプション指定時
vlan10(一例) インターフェース名
vif マルチキャスト仮想インターフェース番号
Address インターフェースのIPアドレス
DR DR(代表ルーター)のIPアドレス
Hello period 定期的なHelloメッセージの送信間隔(秒)
Next Hello in 次の定期的なHelloメッセージ送信までの時間(秒)
Triggered Hello period PIMルーターの新規発見時などに非定期のHelloメッセージを送信する際の待機時間(秒)
Neighbors インターフェース上の隣接ルーター一覧


関連コマンド

ip pim dr-priority(インターフェースモード)
ip pim hello-holdtime(インターフェースモード)
ip pim hello-interval(インターフェースモード)
ip pim sparse-mode(インターフェースモード)



(C) 2012 - 2021 アライドテレシスホールディングス株式会社

PN: 613-001763 Rev.AQ