show ipv6 ospf interface
- モード
- 非特権EXECモード
- カテゴリー
- IPv6 / 経路制御(OSPFv3)
構文
> show ipv6 ospf interface [IFNAME]
コマンド説明
OSPFv3インターフェースの情報を表示する。パラメーター
IFNAME- インターフェース名。省略時はすべてのOSPFv3インターフェースが対象となる
使用例
awplus> show ipv6 ospf interface
vlan1 is up, line protocol is up
Interface ID 301
IPv6 Prefixes
fe80::200:cdff:fe28:748/64 (Link-Local Address)
2001:db8:2222:10::5/64
Security Policy
Authentication NULL
Encryption NULL
OSPFv3 Process (*null*), Area 0.0.0.0, Instance ID 0
Router ID 10.10.10.5, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Interface state DR
Designated Router (ID) 10.10.10.5
Interface Address fe80::200:cdff:fe28:748
Backup Designated Router (ID) 10.10.10.1
Interface Address fe80::200:cdff:fe28:747
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:08
Neighbor Count is 1, Adjacent neighbor count is 1
vlan10 is up, line protocol is up
Interface ID 310
IPv6 Prefixes
fe80::200:cdff:fe28:748/64 (Link-Local Address)
2001:db8:5000:10::1/64
OSPFv3 Process (*null*), Area 0.0.0.2, Instance ID 0
Router ID 10.10.10.5, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Interface state DR
Designated Router (ID) 10.10.10.5
Interface Address fe80::200:cdff:fe28:748
No backup designated router on this link
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:05
Neighbor Count is 0, Adjacent neighbor count is 0