## CentreCOM AR410 V2 設定例集 2.6
##  109 IPルートフィルター
##  ルーターAのコンフィグ

SET BRI=0 MODE=TDM ACTIVATION=ALWAYS TDMSLOTS=1-2
CREATE TDM GROUP=TOOS INT=bri0 SLOTS=1-2
CREATE PPP=0 OVER=TDM-TOOS
ENABLE IP
ADD IP INT=vlan1 IP=192.168.10.1 MASK=255.255.255.0
ADD IP INT=ppp0 IP=172.16.10.1 MASK=255.255.255.0
ADD IP RIP INT=ppp0 SEND=RIP2 RECEIVE=RIP2
ADD OSPF AREA=BACKBONE
ADD OSPF RANGE=192.168.10.0 MASK=255.255.255.0 AREA=BACKBONE
ADD OSPF INT=vlan1 AREA=BACKBONE
SET OSPF ASEXTERNAL=ON RIP=BOTH
ENABLE OSPF
ADD IP ROUTE FILTER IP=192.168.100.* MASK=255.255.255.* AC=EXCLUDE DIR=RECEIVE INT=vlan1 PROTO=OSPF
ADD IP ROUTE FILTER IP=*.*.*.* MASK=*.*.*.* AC=INCLUDE DIR=SEND INT=vlan1 PROTO=OSPF
ADD IP ROUTE FILTER IP=*.*.*.* MASK=*.*.*.* AC=INCLUDE DIR=RECEIVE INT=vlan1 PROTO=OSPF
ADD IP ROUTE FILTER IP=*.*.*.* MASK=*.*.*.* AC=INCLUDE INT=ppp0 PROTO=RIP