## CentreCOM AR415S 設定例集 2.9 ## 175 センター/リモート間でIPv6マルチキャストネットワークの構築 ## ルーターAのコンフィグ CREATE PPP=0 OVER=eth0-ANY SET PPP=0 OVER=eth0-ANY USER=userA@isp PASSWORD=isppasswdA BAP=OFF LQR=OFF ECHO=ON ENABLE IP ADD IP INT=vlan1 IP=192.168.1.1 ADD IP INT=ppp0 IP=172.16.0.1 MASK=255.255.255.255 ADD IP ROUTE=0.0.0.0 MASK=0.0.0.0 INT=ppp0 NEXTHOP=0.0.0.0 ENABLE FIREWALL CREATE FIREWALL POLICY=net ENABLE FIREWALL POLICY=net ICMP_F=PING,UNREACH DISABLE FIREWALL POLICY=net IDENTPROXY ADD FIREWALL POLICY=net INT=vlan1 TYPE=PRIVATE ADD FIREWALL POLICY=net INT=ppp0 TYPE=PUBLIC ADD FIREWALL POLICY=net NAT=ENHANCED INT=vlan1 GBLINT=ppp0 ADD FIREWALL POLICY=net RULE=1 ACTION=ALLOW INT=ppp0 PROTO=41 IP=172.16.0.1 GBLIP=172.16.0.1 ENABLE IPV6 ADD IPV6 INT=vlan1 IP=2001:0:0:1::1/64 PUBLISH=YES ENABLE IPV6 ADVERTISE ADD IPV6 TUNNEL local=172.16.0.1 target=172.16.0.2 INT=virt0 ADD IPV6 TUNNEL local=172.16.0.1 target=172.16.0.3 INT=virt1 ADD IPV6 RIP INT=virt0 ADD IPV6 RIP INT=virt1 ENABLE IPV6 RIP ENABLE IPV6 MLD ENABLE IPV6 MLD INT=vlan1 ENABLE IPV6 MLD INT=virt0 ENABLE IPV6 MLD INT=virt1 ENABLE PIM6 ADD PIM6 INT=vlan1 ADD PIM6 INT=virt0 ADD PIM6 INT=virt1 ADD PIM6 BSRC ADD PIM6 RPC GROUP=ff0e:0:0:1::/64