Manager > enable ipv6 debug
Info (1066271): IPv6 debuging has been enabled.
Manager > Sending to Vlan: outIpIndex=2, outAddrIndex=0
Sending to Vlan: nextHop=::
Sending to Vlan: destAddress=ff02::0009 portNumber=0
calling vlanDataRequest on all ports
Sending to Vlan: outIpIndex=1, outAddrIndex=0
Sending to Vlan: nextHop=::
Sending to Vlan: destAddress=ff02::0009 portNumber=0
calling vlanDataRequest on all ports
Manager > Received IPv6 pkt: DestAddress: ff02::0009
SrcAddress:fe80::0200:f4ff:fec4:0463
Received IPv6 pkt: pktL=32, bufIpInd=1, bufLogInd=0, nH=17 localType = 524288
Received IPv6 pkt: addrIndex=0, intName=vlan10, ifIntAddrNum=2 ipIntIndex=1
iplocaltype=0
Local packet received
Manager > Received IPv6 pkt: DestAddress: 3ffe:0b80:003c:0020:0290:99ff:fe0e:e00
a
SrcAddress:3ffe:0b80:003c:0010:0290:99ff:fe42:00f2
Received IPv6 pkt: pktL=16, bufIpInd=1, bufLogInd=1, nH=58 localType = 0
Received IPv6 pkt: addrIndex=1, intName=vlan10, ifIntAddrNum=2 ipIntIndex=1
iplocaltype=0
Forwarding IPv6 pkt: ipInterface=2, addIndex=1
nexthop=::
dest=3ffe:0b80:003c:0020::
Sending to Vlan: outIpIndex=2, outAddrIndex=1
Sending to Vlan: nextHop=::
Sending to Vlan: destAddress=3ffe:0b80:003c:0020:0290:99ff:fe0e:e00a portNumber=
0
Don't know how to send, creating VLan NDCache entry
int=2, m=1, srcLink=00-00-cd-08-17-0c
destAddr=ff02::0001:ff0e:e00a
ndAddr=3ffe:0b80:003c:0020:0290:99ff:fe0e:e00a
multicast=1
dest=ff02::0001:ff0e:e00a
Sending to Vlan: outIpIndex=2, outAddrIndex=1
Sending to Vlan: nextHop=::
Sending to Vlan: destAddress=ff02::0001:ff0e:e00a portNumber=0
calling vlanDataRequest on all ports
|