Manager > show debug
SHOW SYSTEM
--------------------------------
SysDescription
CentreCOM VX811R version 1.0.00 31-Aug-2006
SysContact:
SysLocation:
SysName:
SysUpTime:
2961 ( 0:00:29 )
Serial Number:
xxxxxxxxxxxxxx
--------------------------------
Software Version: 1.0.00 31-Aug-2006
Bootbase Version: 1.01 12-Sep-2005
romRasSize: 3890086
CPU chip revision: 1
CPU chip clock : 533MHz
CPU core revision: 0
Main PSU : On
FanModule : Exist
Fan1 : Normal Fan2 : Normal
Fan3 : Normal Fan4 : Normal
2.5V : Normal 3.3V : Normal
1.8V : Normal 1.25V : Normal
CPU temperature : Normal PHY temperature : Normal
Configuration
Boot configuration file: Not set
Current configuration: flash:boot.cfg (default)
SHOW FILES
Filename Device Size Created Locks
-------------------------------------------------------------------------------
vx-10-00.rez flash 3890086 11-Sep-2006 21:23:59 0
boot.cfg flash 1197 16-Dec-2005 10:00:18 0
help.hlp flash 23803 16-Dec-2005 10:00:16 0
-------------------------------------------------------------------------------
SHOW INSTALL
Install Release:
Current running install: vx-10-00.rez
SHOW CONFIGURATION DYNAMIC
#
# SYSTEM configuration
#
#
# LOAD configuration
#
#
# USER configuration
#
#
# TTY configuration
#
#
# ASYN configuration
#
#
# ETH configuration
#
#
# L2TP configuration
#
#
# SWITCH PREVLAN configuration
#
#
# VLAN GENERAL configuration
#
#
# VLAN PORT configuration
#
#
# SWITCH POSTVLAN configuration
#
#
# PPP configuration
#
#
# DHCP PREIP configuration
#
#
# IP configuration
#
ena IP
add IP INTerface=vlan1 IPaddress=192.168.1.1 MAsk=255.255.255.0
#
# SNMP configuration
#
#
# INTERFACE configuration
#
#
# FIREWALL configuration
#
#
# TELNET configuration
#
#
# NTP configuration
#
#
# PING configuration
#
#
# DHCP POSTIP configuration
#
ena DHCP
cre DHCP POLIcy=default LEASEtime=7200
cre DHCP RANge=default POLIcy=default IP=192.168.1.100 NUMber=32
#
# BRIDGE configuration
#
#
# LOG configuration
#
#
# HTTP configuration
#
#
# TRIGGER configuration
#
#
# AFU(AUTO-FIRMWARE UPDATE) configuration
#
#
# ACU(AUTO-CONFIG UPDATE) configuration
#
#
# SOFTWARE configuration
#
#
# VDSL configuration
#
SHOW BUFFER
Memory ( DRAM ) ............... 65536 kB
Free memory ................... 39 %
Heap size ..................... 47873199 bytes
Heap usage .................... 21542968 bytes
Heap max. available block size. 26297452 bytes
Memory allocation count ....... 196
Memory free count ............. 0
SHOW CPU
CPU Utilization ( as a percentage )
----------------------------------------
Maximum over last 1 minutes ........ 100.0
Average over last 1 minutes ........ 61.67
Average over last 30 seconds ........ 42.95
Average over last 10 seconds ........ 53.98
Average over last second ............ 44.41
SHOW LOG
Date/Time S Mod Type SType Message
-------------------------------------------------------------------------------
12 09:26:02 4 ENCO ENCO STACS STAC SW Initialised
12 09:26:02 7 SYST REST NORM Router startup, ver 1.0.00-00, 31-Aug-2006, Clock
Log: 09:25:50 on 12-Sep-2006
12 09:26:06 3 USER USER LON manager login on port0
12 09:26:16 2 CH CMD MGR show debug
-------------------------------------------------------------------------------
SHOW EXCEPTION
Switch exception list
------------------------------------------------------------------------------
------------------------------------------------------------------------------
SHOW FFILE CHECK
FFS info:
large files (128KB)
used ............... 1 files
free ............... 7 files
small files (8KB)
used ............... 1 files
free ............... 127 files
|