[index] CentreCOM ARX640S コマンドリファレンス 5.0.0

show ipv6 rip interface

モード: 非特権EXECモード
カテゴリー: IPv6ルーティング / 経路制御（RIPng）

> show ipv6 rip interface [IFNAME]

各インターフェースにおけるRIPngの状態を表示する。

パラメーター

IFNAME IPv6インターフェース名。省略時はすべてのインターフェースが対象となる

使用例

*Router> show ipv6 rip interface ↓ vlan 1 is up, line protocol is up Routing Protocol: RIPng Passive interface: Disabled Split horizon: Enabled with Poisoned Reversed IPv6 interface address: 2001:1:1:10::/64 2001:1:1:10::1/64 fe80::200:f4ff:fe27:7526/64 gigabitEthernet 0 is up, line protocol is up Routing Protocol: RIPng Passive interface: Disabled Split horizon: Enabled with Poisoned Reversed IPv6 interface address: 2001:1:1:20::/64 2001:1:1:20::1/64 fe80::200:f4ff:fe27:7524/64 gigabitEthernet 1 is up, line protocol is up Routing Protocol: RIPng Passive interface: Disabled Split horizon: Enabled with Poisoned Reversed IPv6 interface address: 2001:1:1:30::/64 2001:1:1:30::1/64 fe80::200:f4ff:fe27:7525/64 gigabitEthernet 2 is up, line protocol is up RIPng is not enabled on this interface gigabitEthernet 3 is up, line protocol is up RIPng is not enabled on this interface gigabitEthernet 4 is up, line protocol is up RIPng is not enabled on this interface gigabitEthernet 5 is up, line protocol is up RIPng is not enabled on this interface loop 0 is down, line protocol is down RIPng is not enabled on this interface loop 1 is down, line protocol is down RIPng is not enabled on this interface

show ipv6 rip interface

パラメーター

使用例

関連コマンド